| PART |
Description |
Maker |
| AAT4298IJQ-T1 AAT4296 AAT4296IJS-T1 AAT4298 AAT429 |
Five/Six Channel Push/Pull I/O Expander
|
Advanced Analogic Technologies
Advanced Analog Technology, Inc.
|
| NTE1749 |
Integrated Circuit Push-Pull Four Channel Driver
|
NTE[NTE Electronics]
|
| HV574PG-G |
100MHz, 80-Channel Serial to Parallel Converter with Push-Pull Outputs
|
Supertex, Inc
|
| HV7620XW HV7620 HV7620DG HV7620PG |
40MHz, 32-Channel Serial to Parallel Converter with Push-Pull Outputs
|
Supertex Inc
SUTEX[Supertex, Inc]
|
| MX877 MX877R MX877RTR |
8-Channel, 60V Driver with Push-Pull Output, 3 Wire Interface
|
Clare, Inc.
|
| HV5790807 HV57908 HV57908-07 HV57908PG-G |
8MHz, 64-Channel Serial to Parallel Converter with Push-Pull Outputs
|
Supertex, Inc
|
| HV610 |
32-Channel Serial to Parallel Converter With High Voltage Push-Pull Outputs
|
Supertex, Inc
|
| 087741-00 MX877 087700-00 |
8-Channel, 60V Relay/Load Driver Push-Pull Output, 3 Wire Interface
|
IXYS Corporation
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| HV5308 HV5308DJ HV5308PG HV5308PJ HV5308X RBHV5308 |
32-Channel Serial To Parallel Converter With High Voltage Push-Pull Outputs EL DISPLAY DRIVER, CQCC44
|
Supertex, Inc.
Supertex Inc
SUTEX[Supertex, Inc]
SUTEX[Supertex Inc]
|
|
